Scan2x Manual Setup for Canon ScanFront 400 network scanner
The Canon ScanFront 400 network scanner is a combination of a cutting-edge document scanner design and a full colour touch-sensitive screen which allows Scan2x to give users a fully immersive document scanning experience from one device.
The ScanFront 400 unit is shipped with a basic built-in application that allows for simple jobs to be configured and output to a limited number of destinations. To prepare the unit to run Scan2x from the Scan2x server, several steps need to be followed.
ØCanon provide regular software updates with enhancements to the ScanFront operating system, and it is important that you ensure that you are running the latest update. To do this, go to the following link online and follow the instructions: https://www.canon-europe.com/support/products/document-scanners/scanfront-series/imageformula_scanfront-400.aspx?type=firmware
ØPlease make sure that the SSL Certificate has been set up first - if not, please see the SSL Certificate Setup Tab.
ØOnce you are satisfied that your ScanFront is running the latest software, we can configure it to use Scan2x instead of the built-in application.
ØUpon starting the ScanFront 400 device, the home screen shown below will appear. Access the settings page by clicking on the Administration Settings button. Leave the password field empty (this is the standard value) and click ok.
ØThe following Administrator Settings page will be displayed.
ØClick on the Device Configuration button, followed by the ScanFront Maintenance button. Then select the Device Detail Settings button. The page below will be displayed. Please set: "Allow Remote Connection" to ON.
ØTo set the device network connection, from the main menu screen select the Device Configuration button, followed by the Network Setting button. The screen below will appear.
ØGive the device a fixed IP address and subnet or select DHCP as required.
ØSet the device Date time by selecting the Device Configuration button from the home screen, followed by the Date/Time Settings button. Set up the time and date.
ØSet the device Language Time zone by selecting the Device Configuration button from the home screen, followed by the Language/Time zone settings button. Select the appropriate language.
ØSet the device to web access mode and point it to the Scan2x Server by selecting the Device Configuration button from the home screen, followed by the ScanFront Maintenance button. The following screen will appear.
ØTick the External Web Application Server Enable button by pressing it and enter the fixed IP address of the Scan2x server in the Server Address text box on the ScanFront 400 device. (e.g., http://192.168.1.100/login.html)
ØReboot the ScanFront 400 device and wait for the Scan2x login screen to appear.